EarthQuaker Devices Park Fuzz Sounds
Park Amplifiers and EarthQuaker Devices have teamed up to bring you a faithful recreation of the original Park Fuzz Sound! While it retains the original sounds, there are several modern upgrades to improve performance, reduce extraneous background noise and add versatility.
Features - EarthQuaker Devices Park Fuzz Sounds
- Metal film resistors and caps for quieter performance
- NOS matched germanium transistors for consistent, reliable tones
- Wider fuzz range, more than twice the original
- Smaller footprint, true bypass switching with LED indication and power supply compatible
Controls - EarthQuaker Devices Park Fuzz Sounds
- Volume: This is the level control, louder to the right, quieter to the left.
- Treble/Bass: This is the tone control, thicker tones to the right, brighter to the left.
- Fuzz: This is the gain control, more fuzz to the right, less to the left.
Tech Specs - EarthQuaker Devices Park Fuzz Sounds
- Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
- Current Draw: 3 mA
- Input Impedance: 100 kohm
- Output Impedance: <1 kohm
- Switching: This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.
- Power: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. EarthQuaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
